Insure that parts to be laminated are laminated on both sides before clamping.
Inspect for moisture content after the lamination process.
Inspect for rough cut sizes to insure allowances are made for machining, length, width, height or thickness.
All parts need to be checked for proper size and machining according to the detail.
Inspect moisture content.
There are no parts splitting or cracking.
Dry fit parts to check for proper fit.
Inspect door style, door, side panels, parting rails, etc. For proper construction and warping (Use straight edge).
Check all bored and mortised parts for proper size boring and tennon.
Check that all carvings are consistent and complete. ( Used mirror image concept)
Check to insure that parts fit properly.
Pre Sanding - Parts Sanding:
Insure all parts are sanded properly.
Insure that the edges are broke on all parts.
Pre-fill all tops that have open grain.